Website Archive

Content on DTSC’s Website Archive is no longer being updated. It is being provided for informational purposes only and may be out of date, contain technical inaccuracies, typographical errors or broken links. This content is not promised or guaranteed to be correct, current or complete. DTSC assumes no responsibility (and expressly disclaims responsibility) for updating this site. Any reliance on the content contained herein is at the user’s own risk. Users are solely responsible for confirming the accuracy and completeness of all posted information before citing or using the information. By accessing this site, users agree that DTSC shall not be held liable for any claim, loss or damages which may result from the use of, access to, or inability to use the content contained herein.

Metal Finishing Model Shop Training

Archived Training Presentations from the Compliance Assistance and Pollution Prevention for Metal Finishers Seminar, 2009

The Metal Finishing Model Shop Program held a two-part seminar for businesses that perform metal finishing and operate pre-treatment systems and for local agency staff.

The presentations given during both parts of the seminar are available by selecting them on the agenda:

Video on Pollution Prevention for Metal Platers: Dragout Reduction

Reducing plating solution drag-out is an important pollution prevention goal for the metal finishing industry. It is one of the best ways for electroplaters to reduce hazardous waste generation, conserve raw materials and water, and reduce operating costs. Process line workers hold the key to drag-out reduction because their work routines and habits have a big impact on efficiency. The video shows operators how to reduce drag-out using these best practices:

  • Proper parts racking;
  • Process bath control;
  • Control parts removal by adjusting withdrawal rate and drainage time; and
  • Use drag-out reduction equipment properly- hang bars, drain boards, spray rinses, and drain guards.

The information in the video is provided as guidance for operators to reduce hazardous waste generation and should not be used to determine compliance with statutes and regulations. If you would like compliance information, you should refer to our Laws & Regulations and DTSC Policies and Procedures web pages.

View the video from YouTube (opens in new window)

View the video from YouTube (opens in new window)

Video on Pollution Prevention for Metal Platers: Three Case studies

Three southern California businesses demonstrate equipment that reduces their waste and operating costs.

  • Reverse Osmosis for Metal Finishing
  • Cooling Systems for Hard Chrome Electroplating
  • Reducing Rinse water Use With Conductivity Control Systems

 

View the video from YouTube (opens in new window)
English language only

 

Archived Seminar Presentations

DTSC hosted a free, one-day pollution prevention and compliance assistance seminar on January 9, 2008 at Mission College in Santa Clara, California. This seminar focused on providing information to businesses that operate metal finishing and waste water pretreatment processes on how to prevent environmental violations, reduce waste and emissions and associated costs, and stay current with local regulatory issues.

Links to seminar presentations are available on the seminar agenda.

The Metal Finishing Model Shop Program held a free seminar on September 17, 2008, for businesses that perform metal finishing and operate pretreatment systems. This seminar covered how to prevent environmental violations, reduce waste and emissions, conserve water and energy, and stay current with local regulatory issues. Staff from DTSC, South Coast Air Quality Management and industrial waste water programs in the region presented information to help operators run cleaner, safer shops. Links to the presentations are available in the agenda.

Links to seminar presentations are available on the seminar agenda.